Xiaomi MJSXJ09CM Manuel D'utilisation page 4

3. Place the side of the base with arrows facing
forward, and then align the holes. Insert the
screws and then tighten them into the wall
plugs with a Phillips head screwdriver.
4. Align the grooves on the bo om of the camera
with the raised part on the base, and then turn it
clockwise until it locks into place.
Notes:
The wall must be able to support at least three times the total weight of
the camera.
Warning
To prevent possible injury, the camera must be securely fixed to the ceiling
or wall according to the installation instructions.
3