Mains Lead - Sony BRAVIA FW-85BZ35F Guide De Référence

Masquer les pouces Voir aussi pour BRAVIA FW-85BZ35F:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
FW-49/43BZ35F
8 mm – 12 mm
M6 screw (not supplied)
Cord (not supplied)
Ventilation
• Never cover the ventilation holes or insert anything in the
cabinet.
• Leave space around the LCD Monitor as shown below.
• It is strongly recommended that you use a Sony Wall-Mount
Bracket in order to provide adequate air circulation.
Installed on the wall
10 cm
Leave at least this space around the set.
Installed with stand
10 cm
Leave at least this space around the set.
6
GB
1.5 N·m/1,5 N·m
{15 kgf·cm}
Screw (not
supplied)
30 cm
10 cm
10 cm
30 cm
10 cm
6 cm
• To ensure proper ventilation and prevent the collection of dirt or
dust:
 Do not lay the LCD Monitor flat, install upside down,
backwards, or sideways.
 Do not place the LCD Monitor on a shelf, rug, bed or in a
closet.
 Do not cover the LCD Monitor with a cloth, such as curtains, or
items such as newspapers, etc.
 Do not install the LCD Monitor as shown below.
Air circulation is blocked.
Wall

Mains lead

Handle the mains lead and socket as follows in order to avoid any
risk of fire, electric shock or damage and/or injuries:
• Use only mains leads supplied by Sony, not other suppliers.
• Insert the plug fully into the mains socket.
• Operate the LCD Monitor on a 220 V – 240 V AC supply only.
• When wiring cables, be sure to unplug the mains lead for your
safety and take care not to catch your feet on the cables.
• Disconnect the mains lead from the mains socket before
working on or moving the LCD Monitor.
• Keep the mains lead away from heat sources.
• Unplug the mains plug and clean it regularly. If the plug is
covered with dust and it picks up moisture, its insulation may
deteriorate, which could result in a fire.
Note
• Do not use the supplied mains lead on any other equipment.
• Do not pinch, bend, or twist the mains lead excessively. The core
conductors may be exposed or broken.
• Do not modify the mains lead.
• Do not put anything heavy on the mains lead.
• Do not pull on the mains lead itself when disconnecting the
mains lead.
• Do not connect too many appliances to the same mains socket.
• Do not use a poor fitting mains socket.
NOTE ON MAINS ADAPTOR (models with
supplied mains adaptor only)
Warning
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To prevent fire or shock hazard, do not place objects filled with
liquids, such as vases, on the apparatus. Do not install this
equipment in a confined space, such as a bookshelf or similar
unit.
• Please ensure that the mains socket is installed near the
equipment and shall be easily accessible.
• Be sure to use the supplied mains adaptor and mains lead.
• Do not use any other mains adaptor. It may cause a
malfunction.
• Connect the mains adaptor to an easily accessible mains socket.
• Do not coil the mains lead around the
mains adaptor. The core wire may be cut
and/or it may cause a malfunction of the
media receiver.
• Do not touch the mains adaptor with wet
hands.
• If you notice an abnormality in the mains adaptor, disconnect it
from the mains socket immediately.
• The set is not disconnected from the mains source as long as it
is connected to the mains socket, even if the set itself has been
turned off.
• As the mains adaptor will become warm when it is used for a
long time, you may feel hot when touching it by hand.
Wall

Publicité

Table des Matières
loading

Table des Matières