What If; Error Rectification - Ivoclar Vivadent Bluephase Mode D'emploi

What if....?

Symbol Causes
Electronic defect in the handpiece
or battery
Apparatus is overheated or undercooled
Electronic defect in the battery
Battery empty
Charging contacts contaminated
No display
during
charging
Battery in safety mode
(integrated protective circuit)
Power pack not connected or defective
LED of the
charging
base is not
illuminated
14

Error Rectification

Remove and reinsert the battery. If the error remains,
replace the battery with the power pack (Click & Cure).
If the error remains, please contact your dealer or your
local Service Center.
Allow the apparatus to cool down (or assume room
temperature if it is undercooled) and try again after a
certain time. If the error remains, please contact your
dealer or your local Service Center.
Remove and reinsert the battery. If the error remains,
place the apparatus into the charging base.
If the error remains nonetheless, replace the battery
with the power pack (Click & Cure).
Please contact your dealer or your local Service Center.
Position the handpiece in the charging base. „Charg-
ing Battery" briefly appears in the display before the
display returns to the stand-by mode. If the battery is
not charged, the contacts have to be cleaned. If the
error remains, please contact your dealer or your local
Service Center.
Check if the handpiece has been correctly placed into
the charging base. Clean battery contacts. Information:
"Charging Battery" briefly appears in the display
before the display returns to the stand-by mode.
If cleaning the battery contacts does not improve the
results, remove the battery from the apparatus. Charge
the battery separately from the handpiece in the
charging base for approx. 10 minutes.
If the error remains, please contact your dealer or your
local Service Center.
Check if the power pack is correctly positioned in the
charging base (also check the charging contacts) or if
the power pack is connected to the power supply by
means of the power cord (display on the power pack
lights up in green if it works correctly).
If the error remains, please contact your dealer or your
local Service Center.