Parts List - artograph LightTracer Elite Guide De L'utilisateur

•
Figure 2
To Install Lamp
(Figure 2)
1. Insert both ends of the lamp with the
prongs vertical into the lamp socket.
2. Turn the lamp approximately ¼ turn until
you feel it lock into place.
3. Snap plastic work surface back into place
using slight pressure on all four sides.

Parts List

Elite Viewing Surface ....................... 151-735
8 watt Fluorescent Lamp ................. 106-049
Elite 2 Viewing Service .................... 151-785
15 watt Fluorescent Lamp (2) .......... 106-050
The fl uorescent lamp is available from
any hardware supply store or directly
®
from Artograph via our toll-free number
at 1-888-975-9555, or online at
www.artograph.com.
Other Artograph
Products
®
Artograph manufactures a full-line of
opaque art projectors, light boxes, spray
booths and Open Studio furniture. Please
visit us at www.artograph.com for more
product information.
•
Acrylic Viewing Surface
•
Daylight Fluorescent
Lamp (inside)
®
3