Parts List - artograph Tracer Projector Mode D'emploi

•
Lamp (inside)

Parts List

1. Lens .........................................200-685
2. Lamp
(120V, 100 watt
Lamp
UK ONLY (240V, 75 watt)
OR Lamp
(220/240v 23 watt)
Fluorescent ..............................106-062
Projector
Maintenance
Replacement Lamps
The Tracer projector includes one of
the lamps listed above in the parts list;
however any lamp up to 100 watts may
be used including a fluorescent lamp.
A 23-26 watt fluorescent helix lamp may
be substituted for the standard 100 watt
incandescent lamp. Fluorescent lamps
are much cooler and offer long life.
For best image brightness and color,
use Daylight (6500 ansi) lamps. For
questions contact customer service.
Cleaning
LENS: Clean the lens with a
commercial lens cleaner and a soft cloth
or lens tissue. Apply cleaner to the cloth:
NEVER apply cleaner directly onto the
lens as it may seep inside.
MIRROR: The Tracer features a special
front-surface mirror, which eliminates
4
Lens
) .................106-018
......106-052
double imaging and enhances
brightness. Normally the mirror will not
require cleaning other than occasional
dusting. Clean the silvered surface with
care using a mild cleaning solution and
a soft cloth or tissue. DO NOT SCRUB!
Warranty
Be sure to fill out and mail the enclosed
warranty registration card. You may
•
also register your Tracer online at
www.artograph.com.
Artograph projectors are guaranteed
against all defects in material and
workmanship for five years from the
date of sale to the original purchaser.
Any part of the equipment which
becomes defective under normal
installation and use will be repaired
or replaced by ARTOGRAPH without
charge for factory labor and materials,
providing the equipment is returned,
shipping pre-paid, to our factory within
this period. CONTACT OUR OFFICE
FOR RETURN AUTHORIZATION.
THIS WARRANTY DOES NOT
APPLY TO LAMPS.
Equipment repaired or replaced under
warranty will be returned freight or
postage prepaid. The warranty for
repaired or replacement parts shall be
for the duration of the original warranty.
This warranty does not apply to
equipment which has been subjected
to abuse, accident, or alteration, nor to
equipment which has been improperly
installed or wired in violation of the
printed instructions furnished.