Alarm Clock; Setting An Alarm - Revo K2 Manuel De L'utilisateur

ALARM CLOCK

SETTING AN ALARM

K2 is able to store two individual alarm settings. To set or change an
alarm, either press the button, or select MENU, then MAIN MENU,
then ALARM. Select which of the ALARM SETTINGS (Alarm 1 or Alarm
2) you would like to modify or enable.
Using the cursor control, scroll through the options below, setting your
preferences.
When your preferences have been set, remember to select SAVE.
K2 shows any active alarms by displaying an icon at the bottom of
its screen.
When in STANDBY MODE, by simply pressing the
turn any alarms held in memory ON or OFF. Pressing
through ALARM 1 and ALARM 2 settings, enabling, and disabling
them. If the ALARM icons are displayed, the alarm is enabled.
If no alarm icon is shown, the alarms are switched off.
STOPPING AN ALARM
When an alarm is sounding, pressing any one of K2's
buttons will STOP the alarm.
When the alarm has been cancelled, an ALARM OFF message will be
displayed on K2's screen.
32
button, you can
will cycle
Alarms
Alarm 1: Off [06:55AM]
Alarm 2: Off [07:50AM]
Alarm 1
Enable : Daily
Time : 7:30AM
Mode : internet radio
Preset : last listened
Volume : 6
1 2/ 1 0 /2 0 09
14:30
06: 55 AM 07: 5 0AM
Alarm off