Basic Operation; How To Use Your Futech Nexus; Button Functions - Futech Nexus Manuel Utilisateur

FUTECH-Nexus4langues_Doc_A 510 S 29/06/11 18:31 Page78

Basic Operation

How to use your FUTECH NEXUS

Horizontal Setup
The laser can be mounted on a 5/8"-11 tripod or placed directly on a
solid, stable surface. FUTECH NEXUS can be suspended from a ceiling
grid using the wall mount (optional).
Vertical Setup
The laser can be placed directly on its back on a solid, stable surface. For
more stability, it is recommended to use the wall mount (optional).
Turning on the laser
Turn on the laser with the On/Off key {B-1}. It does a self-test and the
beam blinks while the laser is self- leveling. After it is leveled, the head
rotates. You can choose TILT Alert mode or change to manual mode (see
later sections).
The laser has a wide self-leveling range; however, if the laser is set up out
of the leveling range, the laser beam will continue to blink and the
rotation will not start.
LED indication
The LED indicator {B-9} slowly blinks green while the axes are leveling
and stays on when both axis has reached a level position.

Button Functions

The UP/DOWN buttons on the laser and the remote control buttons have
multiple functions depending on the mode of operation. Please refer to the
chart below to better understand their functionality.
78