Pairing The Camera; Maintenance; Safety Instructions - Extel WESVCM 82401 Guide D'installation Et D'utilisation

e. Pairing the camera(s)
The camera must be "associated" to the compatible monitor. Press the « Link » button to pair
the camera.
You have 60 seconds to pair the camera (monitor countdown). Only one channel per camera can
be activated via the monitor. In the case of several cameras, make sure you choose 1 different
channel for each camera.
5

MaIntEnanCE

The warranty is void if the parts are dismantled. Clean the outside only with a soft and dry cloth.
Before cleaning, disconnect and switch off the video surveillance system.
Caution: Do not use any acid or alcohol based or other similar cleaning product or solvent. You
may damage the appliance and the vapours are explosive and dangerous for your health.
Do not use any tool which can be voltage conductor (metallic brush, sharp tool...or other) for
cleaning.
6

SaFEtY InStruCtIonS

The damages caused by the non-compliance to the manual lead to the expiration of the warranty.
We will not assume any responsibility for the resulting damage!
We will not assume any responsibility concerning any damage, to the goods or people, caused by
improper handling or by non compliance with the safety instructions.
This product has been manufactured in compliance with safety instructions. In order to keep this
status and ensuring the best operation of the product, the user must respect the safety instructions
and warnings contained in this manual.
CautIon
For any other safety instructions and FCC/CE warnings, please refer to
the user manual of the video surveillance kit.
CFI EXTEL WESVCM 82401 - 06/2009 - V1
7GB