Fixing The Camera Bracket; Connecting The Camera(S) - Extel WESVCM 82401 Guide D'installation Et D'utilisation

CautIon
c. Fixing the camera bracket
• Make sure that no element interferes with the installation.
• Search for a suitable place to fix the bracket.
• Screw the wall part with the supplied screws (use bushing if necessary).
• Screw the camera on the bracket a.
Aim the camera at the desired direction and tighten the side retaining screw B.
•
d. Connecting the camera
1. Connect the cord of the 5VDC adaptor to the "Power supply" plug of the camera.
2. Plug the adaptor into a 230 VAC outlet (the BATT indicator turns on).
3. Use without adaptor: Lithium battery with 4-hour battery life
Battery indicator: - Green LED: battery to be charged
6GB
Be sure any element does not avoid inserting the screws
in the wall.
a
- Red LED: empty battery
- LED OFF: full battery
CFI EXTEL WESVCM 82401 - 06/2009 - V1
B