Fixing The Camera Bracket; Connecting The Camera; Infrared Lighting System; Pairing The Camera - Extel WESVCM 82501 Guide D'installation Et D'utilisation

c. Fixing the camera bracket
Make sure that no element interferes with the installation.
Search for a suitable place to fix the bracket.
Screw the wall part with the supplied screws. (Use bushings if necessary).
Screw the camera on the bracket.
Aim the camera at the desired direction and tighten the side retaining screw.
d. Connecting the camera
1. Connect the cord of the 5VDC adaptor to the "Power supply" plug of the camera.
2. Plug the adaptor into a 230 VAC outlet (the red indicator lights up).
e. Infrared lighting system
The infrared diodes do not produce light visible to the naked eye.
The infrared lighting system activates automatically in the darkness.
f. Pairing the camera
The camera must be "associated" to the monitor.
Refer to the chapter 6-c "Associate the camera to the monitor" of the kit manual.
CFI EXTEL WESVCM 82501 - 06/2009 - V1 7GB