Quick Access - Schmidlin TOUCH CONTROL Mode D'emploi

04 English

Quick Access

Programming the temperature, water flow and water quantity
Quick Access 1
(factory settings)
Quick Access 2
(factory settings)
Quick Access 3
(factory settings)
Changing and saving Quick Access
Quick Access
1, 2 or 3
Resetting Quick Access
Quick Access
1, 2 or 3
26
Press once: Water ON at 36°C and 100% water
flow, fill volume deactivated
Press twice: Water ON at 37°C and 100% water
flow, fill volume deactivated
Press three times:
water flow, fill volume deactivated
Press once, twice or three times:
36°C, 37°C or 38°C and 100 % water flow
Start with fill measurement
(When started for the first time, at least 10 liters of
water is dispensed automatically)
Turn: Change temperature
Press, hold and turn:
Allow the desired amount of water to be dispensed
Press and hold until the light ring lights up PURPLE.
Release the button immediately.
Flashes PURPLE twice: Water OFF, setting saved
(temperature, flow rate, fill volume)
Press once, twice or three times:
36°C, 37°C or 38°C and 100 % water flow
Press and hold until the light ring lights up DARK
BLUE. Release the button immediately. Flashes
DARK BLUE twice: Water OFF, setting reset. (Fill
volume is deactivated.)
Water ON at 38°C and 100%
Water ON at
Change water flow
Water ON at