Velleman WT3116 Notice D'emploi page 13

 Match timer stopped too late: use
difference.
 Round time reaches 0:00 during countdown: the match will continue without sounding the buzzer so the
countdown will not be interrupted.
 Modifying round/break times: press
 In the final round, the break time will not display.
F. ELECTRONIC METRONOME
Upper display: rhythm
Lower left display: number of buzzes per minute
Lower right display: length of a buzz
Electronic Metronome
Set buzz length
Set buzz number
Start metronome
Stop metronome
Reset metronome
G. PROGRAM TIMER (interval training)
The timer may be programmed to consecutively count down and display max. 9 time periods.
Upper display: timer (max. 99:59)
Lower left display: number of repetitions (max. 9)
Lower right display: program number (max. 9)
Program Timer
1. Set desired time for program 1 (P1)
2. Enter P1 into memory and enter times for following programs if
desired
3. Complete program setting. Set the desired number of repetitions
using the shot clock . Press
displayed and the timer will stop.
4. P1 will start counting down and buzzer will sound when it reaches
0:00. P2 will subsequently start. Completion of all programs is
considered one round.
WT3116_v2
and
and reset.
Operation
Operation
and . The current round is
to adjust the difference; use shot clock
- 13 -
to adjust the round
Key Display
0
120 6
0
113 6
1
113 6
5
113 6
0
113 6
Key Display
5:00
1 P1
0:00
1 P2
5:00
1 P1
4:59
1 P1
0:00
Buzzer
Buzzer
VELLEMAN