Technical Data - Bosch GLI 10,8 V-LI Professional Instructions D'emploi

OBJ_BUCH-234-003.book Page 16 Wednesday, August 29, 2007 8:34 AM

Technical Data

Cordless Worklight
Article number
Rated voltage
Lighting duration, approx.
Laser class
Wavelength λ
PEAK
Output power, max.
Operating temperature
Storage temperature
Weight according to
EPTA-Procedure 01/2003
Please observe the article number on the type plate of your cordless worklight. The
trade names of the individual cordless worklights may vary.
Assembly
Battery Charging (Accessory) (see figure A)
Use only the battery chargers listed on the accessories page.
Only these battery chargers are matched to the lithium ion battery of
your cordless worklight.
Note: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery in the battery charger before
using your power tool for the first time.
The lithium ion battery can be charged at any time without reducing its serv-
ice life. Interrupting the charging procedure does not damage the battery.
The lithium ion battery is protected against deep discharging by the "Elec-
tronic Cell Protection (ECP)". When the battery is empty, the cordless
worklight is switched off by means of a protective circuit.
Do not continue to press the On/Off switch after
WARNING
the cordless worklight has been automatically
switched off. The battery can be damaged.
16 | English
GLI 10,8 V-LI
Professional
3 601 D37 U..
V= 10.8
min 450
nm 460
mW 19.4
°C – 10 ... +40
°C – 15 ... +50
kg
1 609 929 K23 • 29.8.07
2
0.3