Button Functions; Basics - Romus RLM-70 Mode D'emploi

Button functions

1. Area / volume calculating
2. Voice function
3. Illumination change
4. Addition / record up
5. Historical data recalls
6. Subtraction / Record down
7. Reference setting
8. Device off/ Clear
9. Unit change
10. Shoot & Measuring
◦ Switching on and off
Switches on the instrument and laser. The dispaly shows the battery symbol
until the next button is pressed.
Press this button lo switch off the instrument. The instrument switches
off automatically after three minutes of inactivity
◦ Reference level setting
See Figure A, press
and the bottom of the instrument. There is beep warning tone when reference
pintis changed.
The default reference setting is from the buttom of the instrument. The reference
point will be set to default every time when it's powered off, every time when it's
powered on.

Basics

to switch reference point between tripod thread, the top
www.romus.fr
Réf. 93257
14