The Solarium Does Not Work Properly; Possible Causes - Philips HB 580 Mode D'emploi

The solarium does not work properly?

The solarium may fail to work properly because it has not been installed or is not used in accordance with the instructions. In that case
you will be able to solve the problem yourself by following the troubleshooting tips below.
If the problem is not mentioned in the list, your solarium may not work properly because it has a defect. In that case we advise you to
contact your dealer or the Philips Service Centre.
Problem
• The solarium does not start.
• The sun couch starts, but the canopy
does not or the other way round.
• The fuse cuts off the power when you
switch on the solarium or during use.
• Poor tanning capacity.

Possible causes

- The plug has not been properly inserted into the wall socket.
- There is a power failure. Check by means of another appliance.
- The timer has not been set.
K
- Connecting cords have not been plugged in (correctly).
- Check the fuse of the circuit to which the solarium is connected.
The correct fuse type is a 16A standard fuse or a slow-blow automatic fuse.
- You are using an extension cord that is too long, that is wound up and/or does
not have the correct current rating. Consult your dealer. Our general advice is
not to use an extension cord.
- You are not following the tanning schedule suitable for your skin type.
- When the lamps have been used for a long time, the UV emitted will decrease.
This effect only becomes noticeable after several years. You can overcome this
problem by selecting a longer tanning time or by replacing the lamps.
8