Safety Instructions; Electrical Safety; User Manual - Toolland VL102 Mode D'emploi

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2.

Safety Instructions

Outdoor use only.
Keep this device away from children and unauthorized users.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children shall be supervised to ensure that they do not play with the appliance.
There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or
spare parts.
Risk of electroshock when opening the cover. Touching live wires can cause life-threatening
electroshocks. Do not disassemble or open the housing yourself. Have the device repaired by qualified
personnel.
Keep this device away from rain, moisture, splashing and dripping liquids.
Always disconnect mains power when the device is not in use or when servicing or maintenance
activities are performed. Handle the power cord by the plug only.
Do not crimp the power cord and protect it against damage. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard. Do not use the device when damage to housing or cables is noticed. Do not attempt to
service the device yourself but contact an authorised dealer.
Class II: this device is designed with double insulation.
Do not use near inflammable products or in explosive atmospheres. Heat can cause fire to
inflammable products even when they are not in sight. Only use in properly ventilated areas.
Device heats up during use. Never touch the nozzle or heat shield while using the device. Let the
device cool down for 30 minutes. Some parts of the device get really hot, even after a short use.

Electrical Safety

 Never modify the plug or power cord in any way. Do not use adapters with earthed devices.
 Avoid any body contact with earthed or grounded surfaces such as pipes, radiators, cookers and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
 If use of the device in humid locations is unavoidable, connect the device to a power supply protected by an
RCD (Residual Current Differential) device.
V. 02 – 17/11/2017
VL102

USER MANUAL

3 ©Velleman nv