H.Koenig MX18 Manuel D'utilisation page 5

Blender
•
1 Fit the sealing ring into the blade base and ensuring the seal is located correctly. Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the jug onto the blade base.
3 Put your ingredients into the jug.
4 Put the filler cap in the lid, then turn.
5 Turn the lid in a clockwise direction to lock onto the jug
6 Place the liquidizer onto the processor base and turn to lock
7 Select a speed or use the pulse control.
8. Don't move the jug, lid and filler cap when the machine is working.
9. Max. 600 g carrots/0,9 L water is to be filled.
.
▲To ensure the long life of your machine, not allowed to continuously use more than 30 seconds, should cool
down the motor at least 3 minute, for 3 cycles.