Electrical Connection - KELCH KENOVA V224 BA Version 1.0 Manuel D'utilisation

3.5

Electrical Connection

The device is connected to the workshop's power supply via a country specific plug.
The connector has an included fuse type T3, 15A / 250 V, 5x20 mm.
The main switch on the presetter switches off the electricity for the whole device!
Figure 3: Main switch on the rear side of the presetter
Figure 4: Electrical diagram for the KENOVA set Line V224
Seite 14
Kelch GmbH • Werkstraße 30 • D-71384 Weinstadt-Endersbach • Tel. (+49)7151 20522 0 • Fax (+49)7151 20522 11 • info@kelchgmbh.de
KENOVA set Line V224  Kelch GmbH 2013
3 Initial Operation