English; Intended Use; Technical Data And Assembly; Maintenance - Bien Air Unifix Mode D'emploi

English

Type
All the benefits of fast connection
and easy rotation through 360°, for
3 and 4-hole connection, of air tur-
bines and micromotors, with or
without light.

Intended use

Product intended for professional
use only. Use in dentistry for prophy-
laxis, general dentistry and en-
dodontic work.

Technical data and assembly

Connector for 2- or 3-hole attach-
ment fig. 2. Connector for 4-hole at-
tachment fig. 3-4.
Connector for 4-hole electrified
attachment/4VLM fig. 5.
Connector for 4-hole electrified at-
tachment/4VLM with air non-return
valve fig. 6.
Classification
Class IIa, «active medical devices»,
as per section III «Classification»,
Rule 2 of Annex IX to European Di-
rective 93/42/EEC, namely: «Non-
invasive devices intended for chan-
nelling liquids or gases for the pur-
pose of administration into the body,
which may be connected to an active
medical device in Class IIa».
Connections fig. 1
• Screw the tube onto the back of
the Unifix.
• To place the turbine on the
Unifix, push the turbine as far as
the stop. Then check the coupling
by pulling on the turbine.
• To remove the turbine, press the
buttons of the Unifix as far as the
stop and take out the turbine. Pro-
ceed to this operation once the
turbine has reached a complete
stop.
1a All Bien-Air Dental turbines for
Unifix connector.
1b Ring for controlling water flow-
rate.
1c 4 Bien-Air Dental electrified lines.
The Unifix connectors are compati-
ble. You can attach a turbine without
light to the connector of a Unifix
with light and vice versa.
Polarity fig. 7.
Adaptor application fig. 8.

Maintenance


Non-sterilisable
Only use maintenance products and
components from Bien-Air Dental.
The use of other products and com-
ponents can void the guarantee.
Overhaul
Never disassemble the device. For
any modification and repair, we rec-
ommend that you contact your regu-
lar supplier or Bien-Air Dental di-
rectly. Bien-Air Dental asks the user
to have its dynamic instruments
checked or inspected at least once a
year.
Cleaning
Carefully clean all surfaces with a
cloth impregnated with Spraynet,
fig. 9.
Disinfection
Disinfect using a clean cloth soaked
in a suitable product. Products con-
taining acetone, chlorine and
bleaches are not recommended as
disinfectants.
Transport
Temperature between -40°C (-40°F)
and 70°C (158°F), relative humidity
between 10% and 100%, atmospheric
pressure 50 kPa to 106 kPa (7.3 to
15.3 psi).
Information
The technical specifications, illustra-
tions and dimensions contained in
these instructions are given only as a
guide. They may not be the subject of
any claim. The manufacturer re-
serves the right to make technical
improvements to its equipment,
without amending these instruc-
tions. For all additional information,
please contact Bien-Air Dental SA at
the address indicated on the back
cover.
8