Activation Procedure - Panasonic DMW-SFU1 Manuel D'installation

Activation procedure

Follow the steps below to enable the extended function.
•
A card that complies with the SD standard is required to activate the
software. (Hereafter referred to as "card")
1.
Check the firmware version (
Check the firmware version of the camera.
Select the menu.
>
MENU
Firmware versions that support
the software key
(
DMC-GH4
•
If your firmware version is older than the supported versions, a firmware
upgrade is required.
For the latest firmware information and for firmware downloads, refer to the
support site below.
: http://panasonic.jp/support/global/cs/dsc/
DMC-GH4
(This Site is English only.)
: http://pro-av.panasonic.net/
AG-GH4
2.
Export the device information
Export the device information from the camera.
1
Insert the card into the camera.
•
Insert a card formatted with the camera.
2
Select the menu.
>
MENU
[Setup] > [Version Disp.]
/ )
AG-GH4
[Setup] > [Activate]
/
DMC-GH4 AG-GH4
2.4 or higher
(ENG) SQC0323
only)
7