Zanussi ZBF 3124A Mode D'emploi page 50

Separate parts Ha, Hb, Hc, Hd as shown in the
figure.
Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
Fix cover (Hc) on guide (Ha) until it clips into place
Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure. .
Hb
Hd
PR266
ca. 50 mm
ca. 50 mm
Hc
PR33
PR167
50
Ha
Hc
90°
90°
Ha
8mm
Ha
Hb