Texas Andreas Petersen Power Split 2000 VH Guide D'utilisation page 30

Step 7: Attach engine
Use the hex bolt M8x85 (#106)
through the big flat washer Ø10
(#102), polyurethane block (#103),
nitrile rubber (#108), the big flat
washer Ø10 (#102), the flat washer
Ø8 (#45), lock washer Ø8 (#46)
and lock nut M8 (#57) mount the
engine (#53) to the mounting plate.
Step 8: Assemble Ball Coupler &
Chain
1.Attach the coupler (#28) to the
tow bar by using hex bolt M10x120
(#43), flat washer Ø10 (#97) and
lock nut M10 (#32).
2.Attach two chains (#41) to the
tow bar by using hex bolt M12x90
(#40), flat washer Ø12 (#3), lock
nut M12 (#67) and thick flat washer
Ø12 (#68).