Texas Andreas Petersen Power Split 2000 VH Guide D'utilisation page 28

1. Connect the plate weld
assembly (#56) with the control
valve (# 14) by a pinØ5x22 (#17)
and cotter pin Ø2x10 (#18)
2. Connect the plate weld
assembly (#56) with the control
valve (# 14) by round-head bolt
M8x50 (#55), nylon lock nut M8
(#57) and tighten.
3. Connect the frame weld
assembly (#111) with the cover
plate (# 16) by bolt M5x10 (#110)
and tighten.