Texas Andreas Petersen Power Split 2000 VH Guide D'utilisation page 27

Step 2: Attach Tow bar and
Support Leg
Fix the support leg (#62) to the tow
bar by a pin (#42) and handle
wheel (#83).
Step 3: Attach Tow bar to Oil
Tank
Fix the tow bar to the oil tank by
using 4 sets of hex bolt M12x40
(#31), flat washer Ø12 (#3) and
lock nut M12 (#67).
Step 4: Assemble Rear Support
Leg
Fix the rear support leg to the tow
bar by using hex bolt M10x75
(#36), lock nut M10 (#32), flat
washer Ø10(#97), R pin(26) and
handle ring(104). Slide in hitch pin
(#35) and secure with R pinØ3x55
(#26).