Yamaha MusicCast SUB 100 Mode D'emploi page 13

Masquer les pouces Voir aussi pour MusicCast SUB 100:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Downloading the "MusicCast CONTROLLER" mobile device app
Install the MusicCast CONTROLLER app on your mobile device, connect this unit to the network, and register this unit
as a MusicCast device.
Search for "MusicCast CONTROLLER" on the Apple Store or Google Play, and install it.
NOTE
● Make sure that the mobile device you're using is connected to your home's router before you proceed.
● The screens and menu names etc. of MusicCast CONTROLLER might change without notice.
● If a different MusicCast device is already registered to the MusicCast CONTROLLER app, you can add this unit to
the app by tapping
Registering this unit on the MusicCast network
Here's how to use "MusicCast CONTROLLER" to register this unit on the MusicCast network, and simultaneously make
network connection settings for this unit.
NOTE
To connect wirelessly to the network, you'll need to have the SSID and security key of the wireless LAN router (access
point) that you're using.
1.
On your mobile device, start "MusicCast
CONTROLLER" and tap "Settings."
2.
From the app's "Settings," tap "Add new
device."
3.
As directed by the instructions that
appear in the screen of your mobile
device, operate "MusicCast
CONTROLLER" and on the rear panel of
this unit, hold down CONNECT for 5
seconds or longer.
To cancel this unit's MusicCast network registration
Operate "MusicCast CONTROLLER" to cancel this unit's registration.
NOTE
If you initialize this unit before canceling the registration, the screen of the "MusicCast CONTROLLER" may show
an error indicated that this device does not exist.
(Settings) in the "Room select" and selecting "Add new device."
(rear panel)
4.
As directed by the instructions that
appear in the screen of your mobile
device, operate "MusicCast
CONTROLLER" to specify the network.
Next, pair this unit with the Pairing Master device of the
MusicCast network. (→ p. 14 "Pairing this unit with the
Pairing Master")
NOTE
If you use a wireless connection to register this unit on the
MusicCast network, the
this unit's top panel will light, indicated that registration on
the MusicCast network is complete.
CONNECTIONS
Wireless LAN indicator of
13
En
English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ns-nsw100

Table des Matières