Charging The Battery; Electrical Safety - Work Men WMTV36-44ACCLI Traduction Des Instructions D'origine

Tournevis rechargeable
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

metal objects.
Do not store the battery where the temperature
may rise above 50 ° C, e.g. in
Never attempt to open the battery.
Do not incinerate battery.
Do not expose charger and
battery to temperatures above
Do not expose charger and
Pictograms on charger
The following pictograms have been applied to the
charger:
"Class II - The machine is
double insulated; Earthing wire
is therefore not necessary
Only use the battery charger
Fail-safe isolating transformer.

ELECTRICAL SAFETY

Check whether the voltage
indicated on the type plate of the
charger corresponds to the mains
DESCRIPTION
Your rechargeable screwdriver has been designed
for light screw driving applications.
1
On/off switch
2
Rotational direction switch
3
Bit holder
4
Power indicator switch
5
Bit holder extension
6
Grip
7
Power indicator (red)
8
Power indicator (green)
9
Power indicator (yellow)
10
Charger
11
Charger plug
12
LED
50 ° C.
battery to water.
indoors.
Cut-out switch.
voltage.

CHARGING THE BATTERY

The battery charger supplied
matches to the battery installed in
the machine. Do not use other
The battery must be charged before first use. Only
after several charge and discharge cycles the
battery will attain full capacity.
plug the plug of changer in the connection.
Insert the charger in the wall socket. The red
indicator light goes on.
Charge the battery for 3-5 hours.
Never charge the battery for more than 5 hours.
The charging process starts as soon as the mains
plug of the battery charger is inserted in the socket
and the machine is then connected to the battery
charger.
The battery charge indicator lights up red to indicate
the charging procedure. The battery is fully charged
as soon as the battery charge indicator is all lit after
the button is pressed.
During the charging procedure,
the handle of the machine warms
When the charging is finished,
disconnect the battery charger
Do not use the machine during
the charging procedure.
- LI-ION BATTERIJ
Voordelen van Li-ion batterijen:
- Li-ion batterijen hebben een hogere
capaciteit/gewichtsverhouding (meer vermogen uit
een lichtere en meer compacte batterij)
- Geen geheugeneffect meer (capaciteitsverlies na
een aantal laad/ontlaadcycli) zoals bij
andere types batterijen (NiCD, NiMH).
- Beperkte zelfontlading
Recharge only with the
Make sure the power supply is
230 volts AC / 50Hz.
Battery power status display
By pressing Operating switch.
The charge status is displayed by three multi-
coloured LED´s:
Red LED is on
Red + yellow LED's are on 20%-70%
All three LED's are on
Once only the red LED is lit, the screwdriver must
be re-charged.
battery chargers.
up.
This is normal.
from the socket.
charger provided.
<20%
>70%
18

Publicité

Table des Matières
loading

Table des Matières