Bluetooth Function; Control Panel - BST NOMAD UHF Série Manuel D'utilisation

POWER SUPPLY: BATTERY & AC OPERATION
1. Built-in rechargeable battery and AC power. Prior to using this system for the first time, please insert the AC lead
into the AC socket of the player and plug the other end on a suitable wall outlet. Make sure that the "CHARGE
INDICATOR" is ON 10 hours continuously.
2. Please recharge once every 6 months if you don't use the system for a longer period of time.
NOTE: Please shut down the power switch after you have finished using the system.
TO PLAY CD/MP3/WMA MUSIC
1. Switch power source to ON.
2. Insert a CD disk or a USB stick or an SD card
3. Press the MODE button to change the music source
4. Select a title via the  or  buttons and press►
TO PLAY LINE IN MUSIC and WIRED MICROPHONES
1. Insert an RCA plug into the LINE IN to each channel, select AUX IN via the MODE button.
2. Insert a wired microphone into MIC INPUT
3. Adjust the MIC VOL
4. Switch the VCV button to activate the function if you want to mute the sound while you are speaking into the
microphone. If you want to sing along with the music, don't activate this function

BLUETOOTH FUNCTION

1. Switch on your Bluetooth device and activate the Bluetooth connect function
2. Select PA SYSTEM in the list of found devices and connect.
3. Press the MODE switch to BT function,
4. Now you can play Bluetooth music.
HOW TO USE THE UHF MICS
Switch on the UHF receiver on the amplifier panel
Switch on the UHF microphone via the switch on the mic body. The box will automatically select the wireless
microphone.

CONTROL PANEL

MODE Cycle through CD/USB / LINE / BLUETOOTH
1. USB port
2. MODE
3. EJECT
4. DISK PORT
5. Mic Echo lever
6. Microphone Volume
7. Treble and Bass
8. UHF Vol A
9. UHF Mic power ON/RF/AF indicate
10. Microphones and Guitar inputs
©Copyright LOTRONIC 2016
Backward
Forward
Play/Pause
NOMAD8UHF / NOMAD12UHF 6