Appendix A: Determining Which Cable You Need
Pipes must be at least 3 feet (0.9 m) long and at least ⅜" and no more than 1 ½" in diameter. For pipes of other sizes,
call 800.562.6587 for suggestions for other products.
Measure your pipe straight along the bottom of a horizontal pipe or on the "weather side" of a vertical pipe (including
valves).
Single cables are available to protect the following lengths of pipe:
• 3 - 4 ft (0.9 - 1.2 m), Cat. #: AHB013
• 3 - 7 ft (0.9 - 2.1 m), Cat. #: AHB016
• 6 - 10 ft (1.8 - 3 m), Cat. #: AHB019
• 9 - 13 ft (2.7 - 4 m), Cat. #: AHB112
• 12 - 16 ft (3.7 - 4.9 m), Cat. #: AHB115
• 15 - 19 ft (4.6 - 5.8 m), Cat. #: AHB118
• 21 - 25 ft (6.4 - 7.6 m), Cat. #: AHB124
• 27 - 31 ft (8.2 - 9.4 m), Cat. #: AHB130
• 37 - 41 ft (11.3 - 12.5 m), Cat. #: AHB140
• 57 - 61 ft (17.4 - 18.6 m), Cat. #: AHB160
• 77 - 81 ft (23.5 - 24.7 m), Cat. #: AHB180
Using two cables
If a cable suitable for your pipe is unavailable or out of stock, you can use two cables together on one pipe. Enter your
exact pipe length in the cable selection calculator at pipeheat.com (mobile device compatible) or call 800.562.6587.
Owner's Manual
13