Velleman VTDESOL4 Notice D'emploi page 9

2. Replace the fillings of both filters as shown in fig. 18.
FIG. 18
fillings
TO STATION TO IRON
BITDESOL4/2
Note : Use a desoldering tip with a Ø of 1.2mm (BITDESOL4/2).
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
- 9 - VELLEMAN
VTDESOL4