Velleman VTDESOL4 Notice D'emploi page 8

FIG. 11 FIG. 12
12. Replacement of Filters
a. FILTER OF THE SOLDER COLLECTOR
1. Make sure that the iron and the filter have cooled sufficiently.
2. Point the iron slightly upwards while pressing and turning the red knob on the butt of the iron.
3. Remove the solder collector (fig. 9).
4. Disassemble the solder collector (fig. 13 & 14).
5. Remove the old filter and replace it with a new one (fig. 15 & 16).
FIG. 13 FIG. 14
FIG. 15 FIG. 16
b. IN-LINE FILTERS
1. Unscrew the in-line filters and pull the two pieces apart (fig. 17 & 18).
FIG. 17
- 8 - VELLEMAN
VTDESOL4