Schluter Systems LIPROTEC LT EBR 1 Mode D'emploi page 26

EN
Operation
To activate the Bluetooth connection between the mobile

device and the Bluetooth receiver, choose your desired
entry.
You can now control and programme the LED strips

connected to the chosen Bluetooth receiver with
your mobile device.
If your mobile device moves out of the Bluetooth connection's
range, the connection will be broken.
If you wish to re-establish a broken connection, proceed as
follows:
Make sure that the mobile device is within the Bluetooth

receiver's reception range.
The range can be reduced by different materials

(e.g. panelling, walls) that come between the mobile
device and the Bluetooth receiver. For every
Bluetooth receiver within the Bluetooth range, the
respective entry will appear.
To re-establish the Bluetooth connection between the

mobile device and the Bluetooth receiver, choose your
desired entry.
3.2.2 Controlling Bluetooth receiver with mobile device
In order to operate the Bluetooth receiver with the
SCHLÜTER app, proceed as follows:
Make sure that a Bluetooth connection exists between

the mobile device and the Bluetooth receiver.
Start the SCHLÜTER app.

24 Bluetooth receiver operating instructions