Conditions For Use - Schluter Systems LIPROTEC LT EBR 1 Mode D'emploi

EN
Safety
The component must not be used for the following
applications under any circumstances:
Outdoors

Underwater

In potentially explosive atmospheres

In swimming pools, saunas or steam baths

Exceeding the load limit required for the power pack is
possible through an incorrect combination of the system
components. This can be the case if LED strips are expanded
by soldering. The component of the LIPROTEC system must
not be used in the wrong combination.
Intended use includes the reading and understanding these
instructions and the observance and following of all
information in these instructions, especially the safety
instructions.
Any other use is expressly considered not to be intended and
leads to an expiration of the warranty and liability claim.

2.2 Conditions for use

Make sure that the components are used only under the
following surrounding conditions:
Temperature: -20 °C to +40 °C

Relative humidity for Bluetooth receiver, remote control,

power pack and terminal connections: 45 % to 85 %
Make sure that the scope of protection is observed according
to DIN VDE 0100-7001 when the components are used in
bathrooms or wet rooms.
18 Bluetooth receiver operating instructions