Connection To A Pc; Setting The Soft Client; Call Acceptance; Volume Control - freeVoice Fox FX 840 DECT USB Manuel D'utilisation

E

Connection to a PC

Plug the supplied USB cable directly into a USB port on your PC (not on the USB hub or dunking
station).
Open the sound settings in your PC and select the FX840 as the default audio device.

Setting the soft client

Your FX840 is set to ship for Skype for Business.
If you use another soft client, open the freeVoice UC Manager (www.freevoice.biz) and select
your UC client provider.
(The possibility of the call acceptance function depends on your softphone)
Call acceptance key
The «Call acceptance» key can be used to accept and terminate calls and to switch the headset on
and off.
Function
Accept call
Terminate call
Switch the headset on
Switch the headset off

Volume control

Use the «+» and «–» keys on the headset to adjust the earpiece volume of your headset.
Mute microphone key
You can use the «Mute microphone» key to mute your headset›s microphone and to deactivate
the mute mode again.
Function
Activate microphone muting
Deactivate muting
Activate pairing mode
Quit pairing mode
18
Tab
x
x
x
Tab
x
x
Press and hold (long click)
x (5 sec.)
Press and hold (long click)
x
x