Getting Started; To Charge The Unit; Turning On; Turning Off - freeVoice Nimbus II Manuel D'utilisation

Getting Started:

Piease fully charge headset after removing it from the package before beginning the pairing process.

To charge the unit:

1 Plug the charger into proper outlet.
2 Plug the unit end of charger into the power outlet of headset.
3 During charging, the indicator light will turn red. When charging is complete, the indicator light will
shut off or flash red to alert you that the headset is fully charged.

Turning on:

Press the multi-function Button once, the Blue LED will flasch Two times.

Turning Off:

Press and hold the multi-function button for 5 seconds, the headset will beep 3 times, and the
indicator light will flash red 3 times.

Pairing the Headset:

Pairing is the professional word for the process of connecting a Bluetooth wireless technology product
to a Bluetooth wireless technology enabled device. This process only needs to be completed one time
with each new.

Pairing to 1 device:

1 Turn your Headset Off
2 Press and hold the multi-function button for about 8 seconds, until the indicator light alternates
between blue and red, indicating that it is in pairing mode.
3 Activate the Bluetooth search feature on your phone,refer to your phone›s manual for further inst-
ructions.
4 Select ‹FreeVoice Nimbus› from the searched device listing.
5 Enter pin code «0000» to confirm and finish pairing. The headset will flash just blue to indicate
completed pairing.

Pairing to 2 devices:

This headset contains a dual-link function for connecting with 2 mobile phones simultaneously.
1 Pair the first phone following the steps above.
2 Temporarily turn off the first connected phone›s Bluetooth wireless technology function.
3 Pair the second phone using the steps above.
4 Turn off the headset, and re-turn on the first phones Bluetooth wireless technology functionality.
5 Return on the headset, and it will reconnect to both devices automatically.Turning On:
Press and hold the multi-function button for 5 seconds,indicator light will flash blue 3 times.

Answering/Ending a Call:

Press the multi-function button once.
E
15