Ibiza Light E-COSMOS Manuel D'utilisation page 4

Often, the set up for Master-Slave and Stand-alone operation requires that the first fixture in the chain be initial-
ized for this purpose via either settings in the control panel or DIP-switches. Secondarily, the fixtures that follow
may also require a slave setting. Please consult the '' Operating Instructions» section in this manual for complete
instructions for this type of setup and configuration.
NAVIGATION THROUGH THE CONTROL PANEL
Access control panel functions using the four panel buttons located directly underneath the LCD Display..
Button Function
MENU Used to access the menu or to return to a previous menu option
UP Scrolls through menu options in ascending order
DOWN Scrolls through menu options in descending order
ENTER Used to select and store the current menu or option within a menu
When a menu function is selected, the display will show immediately the first available option for the selected
menu function. To select a menu item, press <ENTER>.
MENU MAP
Display
Addr
CHnd
SLnd
SHnd
SEnS
bLAnd
LEd
dISP
rPAN
rTiL
Reset
DMX CHANNEL TABLE: SEE AT THE END OF THE MANUAL
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the unit's optics.
•
Clean with soft cloth using normal glass cleaning fluid.
•
Always dry the parts carefully.
•
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
SPECIFICATIONS
Power supply .......................................................................................................................90-240V~50/60Hz
Consumption ...........................................................................................................................................150W
4
Manual - E-COSMOS
Description
A001---A512 address code
13CH or 15CH mode
Auto : Host self-running mode
Soun: Host self-running mode
SL 1: DMX Control Mode
SL 2: Slave Mode
SH 0 : No effect
SH 1: Effect 1
SH 2: Effect 2
SH 3: Effect 3
Sound sensitivity (0-99)
bLAc : No function
Auto: no dmx signal for Auto
Soun: no dmx signal for Sound
HoLd: keep history for dmx
ON/OFF display backlight
YES/NO Reverse display
YES/NO Horizontal motor inversion
YES,/NO Vertical motor inversion
Factory system reset
©Copyright LOTRONIC 2021
8.8.8.8.
MENU UP DOWN ENTER