Basic Operation; Starting System; Playing Tracks - PIONEER DJ DDJ-XP1 Mode D'emploi

Basic operation

This section explains how to combine the unit and rekordbox dvs system using analog players and a DJ Mixer as an example.

Starting system

Connection of a DJ Mixer corresponding to rekordbox dvs and computer
is required.
• For rekordbox dj software, rekordbox dvs plus pack and operation of
DJ Mixer corresponding to rekordbox dvs, refer to the respective
operating instructions.
1 Connect the DJ Mixer corresponding to rekordbox
dvs to a computer using a USB cable.
2 Connect the audio output of the analog player to
the channel input of the DJ Mixer using an audio cable
(RCA (sold separately)).
3 Set a rekordbox dvs record (sold separately) to the
analog player.
• Make sure to use a rekordbox dvs record made by Pioneer DJ.
Records other than that cannot be used.
4 Turn on the computer.
• The audio driver for the DJ Mixer should be installed in advance
before starting rekordbox.
5 Turn on the analog player and DJ Mixer.
6 Start rekordbox.
– For Windows 10/8.1
Click the [rekordbox] icon in [Apps view].
– For Windows 7
Select [All Programs] > [Pioneer] > [rekordbox X.X.X] from the
Windows [Start] menu, then click the [rekordbox] icon.
– For macOS Sierra 10.12, OS X 10.11/10.10
Open the [Applications] folder in Finder, then double click the
[rekordbox] icon in the [rekordbox X] folder.
7 Connect the unit and computer using the supplied
USB cable.
• The unit operates with the operating system's standard driver. There
is no need to install separate driver software for the unit.
8 [DDJ-XP1 is connected.] appears on the rekordbox dj
screen and DDJ-XP1 is ready to use.

Playing tracks

Tracks loaded on the deck start playing when you operate the analog
player to play the rekordbox dvs record.
Closing the system
1 Close rekordbox.
2 Disconnect the USB cable from the computer.
9
En