Connectable Devices; Technology; Technical Features - AEG JP 10 Mode D'emploi D'origine

Lighting
Lighting type 5 LED lights, not repla-
ceable
LED risk group 1 (according to EN 62471)
* The electric conductance corresponds to a copper lead of
this cross-section.

Connectable devices

Allowed Not allowed
Devices with a total rated Devices with a total rated
wattage wattage
< 200 W > 200 W
(also see "Technical Data").
note:
The voltage converter provides a modified sinuso-
idal voltage. To prevent consequential loss, please
verify the device to be powered is suitable (also see

"Technology").

Technology
Attention!
Check the properties of the device to be powered
before using the voltage converter to prevent con-
sequential damage.
There are pure or modified sinusoidal wave voltage
converters.
Model
Modified sinu- 10832
soidal wave
Pure sinusoidal -
wave

Technical features

The power inverter is equipped with technical
features to protect itself and/or connected external
devices.
An alarm sounds when protection is active.
Feature
Overvoltage protection
Low-voltage protection
(protection for the bat-
tery of the vehicle)
Short-circuit protection
Overheat protection
Overload protection
for connecting
(examples)
• Power drills
• Computers
• hobs
• Lamps,
• Fans/vents
• Lawn mowers
in addition to the
modified sinusoidal
wave examples
• Coffee makers
• Shavers
• Audio amplifiers
English 25
Description
• If the input voltage
exceeds 15.5 V ± 0.5 V
the power inverter will
switch off.
• The voltage converter
automatically switches
on again when the input
voltage reaches nominal
voltage again.
• If the input voltage drops
below 10,0 V ± 0,5 V.
• When the input voltage re-
turns to the rated voltage,
the voltage transformer
automatically switches
back on.
• Automatic cut off
• If the indoor temperature
rises above approx. 68 °C
the unit will automatically
switch off.
• If the temperature falls
below 35 ˚C, the voltage
converter automatically
switches on again.
• The unit will automatically
switch off.