VOLTOMAT HEATING FH-103576.1 Mode D'emploi page 52

38. Do not immerse the unit in water.
39. To avoid the risk of fire or electric shock do not remove the
housing.
40. Any servicing other than cleaning and user maintenance
should
representative only.
41. This heating device is not suitable for assembling in vehicles
and machines.
42.
FH-103576.1
PARTS DESCRIPTION
1. Indication light
2. Thermostat control switch
3. Air outlet grille
4. Heat select switch
Heat setting:
The fan heater incorporates a rotatable switch, you can select the setting by turning the switch clockwise to:
"O" position - OFF
" " - FAN
I WARM AIR (low heat output)
II WARM AIR (high heat output)
OPERATION
1. Rotate the switch, choose the suitable one ("FAN"= fan only, no heat/ "I"= low heat output/"II"= high heat
output).
2. Turn the thermostat to choose the temperature, the heater begins to work.
3. The thermostat will turn the heater off when the selected room heating is achieved, and when the
temperature drops it will turn on again automatically.
SAFETY SYSTEM
The appliance has a safety system which automatically switches the unit off when overheated.

If overheating occurs, remove the plug from the socket, rotate the buttons to switch the unit off and let it

cool down for at least 30 minutes. Put the plug in the socket and switch the heater on.
MAINTENANCE
The fan heater only needs regular cleaning on the outside.

Before you clean the unit, turn the switch OFF. Remove the plug form the socket and wait until the fan heater

cools down.
be performed
means "DO NOT COVER".
by an authorized
- 51 -
service
GB