EHEIM CO2SET 6063040 Mode D'emploi page 18

5. Assembly
Assembly of the pressure regulator
DANGER! POSSIBLE INJURY!
Make sure that the pressure regulator is closed before connection.
Close the fine control valve.
A Pressure regulator for CO
Connection of the pressure regulator to the CO2 disposable bottle.
Turn the adjustment knob A of the pressure regulator counter-clockwise to "–". Close
the fine control valve D . Check the gasket in the connection thread B of the pressure re-
gulator and the sealing surface of the bottle valve for cleanliness and damages. Screw the
locking nut of the pressure regulator straight onto the connection thread of the bottle valve
and tighten it hand-tight. You may hear a brief hiss. Do not use a tool!
B Pressure regulator for CO
Connection of the pressure regulator to the CO2 returnable bottle.
Turn the adjustment knob A of the pressure regulator counter-clockwise to "–". Close
the fine control valve D . Check the gasket in the connection thread B of the pressure re-
gulator and the sealing surface of the bottle valve for cleanliness and damages. Unscrew
the pressure regulator evenly and tighten it hand-tight. Do not use a tool! You can dis-
semble the pressure regulator again at any time. Follow the above procedure in reverse
order.
– disposable bottles (Art. No. 6063040)
2
– returnable bottles (Art. No. 6063050)
2
18