Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
KNOWING YOUr CUT-OFF TOOL
3
6
1.
ON/Off Switch
2.
Motor
3.
Guard
4.
Guard Locking Lever
UNPACKING AND CONTENTS
IMPOrTANT:
Due to modern mass production techniques, it is unlikely the tool is
faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE
Description
Cut-Off Tool
Cut-Off Disc
Arbor Wrench
ASSEMBLY AND ADJUSTMENTS
WArNING:
adjusting, adding accessories, or checking a function on the tool.
INSTALLING THE GUARD (FIG 2)
WArNING:
installing a cutting disc or operating the tool.
• unplug the tool.
• Pull the guard locking lever (1) outward from its locked position.
• Slide the guard mounting clamp (2) over the guard mount (4) on the tool.
4
1
5
FIG 1
Q'ty
1
1
1
Always be sure that the tool is switched off and unplugged before
The guard must be installed and properly positioned before
2
7
5.
Cut-Off Disc
6.
Disc Locking Screw
7.
Arbor Wrench
8.
Hex Key
Description
Hex Key
Operator's Manual
8
Q'ty
1
1
9
Publicité
Table des Matières
