Overheat Protection; Overview (Fig. 1) - Philips HR3551 Mode D'emploi

Built-in safety lock
This feature ensures that you can
only switch on the appliance if the
blender jar is assembled on the motor
unit properly. If the blender jar, the
mill or the chopper bowl is correctly
assembled, the built-in safety lock will
be unlocked.

Overheat protection

The appliance is equipped with
overheat protection. If the appliance
overheats, it switches off automatically
(which might occur during heavy
processing jobs or if the appliance is
not used according to the instructions
in the user manual). If this happens, first
switch off and unplug the appliance and
let it cool down to room temperature.
Then check if the quantity of ingredients
you are processing does not exceed the
quantity mentioned in the user manual
or if something is blocking the blade
unit. Then put the mains plug back into
the power outlet and switch on the
appliance again.
2

Overview (Fig. 1)

Main unit
a Motor unit with control knob
b Pulse setting
c Speed settings
d Control knob
EN
10
Glass blender jar
(HR3555/HR3556)
e Measure cup
f Opening in lid
g Lid of the blender jar
h Level indication
i Blender jar
j Sealing ring
k Blade unit
Plastic blender jar
(HR3553)
l Blade unit
m Sealing ring
n Blender jar
o Level indication
p Lid of the blender jar
q Opening in lid
r Small lid
Tumbler (HR3551/
HR3553/HR3554/
HR3556)
s Lid of the tumbler
t Sealing ring of the lid
u Tumbler
v Level indication
w Sealing ring of the blade unit
x Blade unit of the tumbler
y Collar