Table des Matières
Publicité
Optical signal:
Three colour signal lights indicate whether the load is within the two tolerance limits.
The signal lights provide the following information:
+
-
The settings for tolerance weighing may be called up either via menu block „P0 CHK"
(see chap. 8) or faster via the key combination
Settings
Press
and
Press
until the display for entering the lower limit value
appears.
Press
, current setting will be displayed.
To enter the lower limit, e. g. 1000 Kg, press the navigation
keys (See chap. 2.1.1); the currently enabled digit will be
flashing.
Confirm input by
Use
to select
KFB/KFN-TM-BA_IA-e-1220
Goods to be weighed above tolerance limit
Goods to be weighed within tolerance range
Goods to be weighed below tolerance limit
at the same time in weighing mode.
.
Red signal light
glowing
Green signal light
glowing
Red signal light
glowing
27
Publicité
Chapitres
Table des Matières
