Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION REQUIREMENTS
loCatIon RequIRementS
note: If the washer/dryer and pedestal assembly are located
in a garage, 8" (203 mm) must be added under the pedestal so
that the washer/dryer is 18" (458 mm) above the garage floor.
toolS and PaRtS
Gather the required tools and parts before starting installation.
tools needed:
Utility knife
Level
Pliers or slip-joint pliers
2
1/4" hex-head ratchet or
open-end wrench
9/16" open-end wrench
Bucket
additional items needed:
Towel
Parts supplied:
Four #12 x 5/8" hex-head
sheet metal screws
(in parts bag)
Sponge
Two retainer clips
(in parts bag)
Publicité
Table des Matières
