Table Des Matières; Pedestal Safety; Installation Requirements; Tools And Parts - Whirlpool W10198562A Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PEDESTAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
INSTALLATION REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . .2
Tools and Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Location Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Before Installing Your Pedestal . . . . . . . . . . . . . . . . . . . . . . . .3
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed here.
Tools needed
Utility knife
I
" hex-head ratchet or
1
I
4
open-end wrench (leveling
legs)
" hex-head ratchet or
5
I
16
nut driver (for sheet metal
screws)
" nutdriver
1
I
4
Parts supplied
Remove the parts package from the pedestal drawer. This
package contains 4, #12 x
and drawer divider.
2
TABLE OF CONTENTS

PEDESTAL SAFETY

Your safety and the safety of others are very important.

INSTALLATION REQUIREMENTS

" open-end wrench
9
I
16
(for leveling leg locknuts)
Pliers or slip-joint pliers
I
(for drain and inlet hoses)
Level
I
Bucket
I
" hex head sheet metal screws
5
8
INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .4
Installing the Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.

Location Requirements

WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from dryer.
Place dryer at least 18 inches (46 cm) above the floor for
a garage installation.
Failure do to so can result in death, explosion, or fire.
NOTE: If dryer and pedestal assembly is located in a garage,
3" (7.6 cm) must be added under pedestal so that dryer is
18" (46 cm) above garage floor.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

W10205335a sp

Table des Matières