strapex STR 67 Mode D'emploi page 13

Fig. 4
Fig. 5
Fig. 6
11.11
Tensioning
– Turn the knurled wheel at the rear of the air motor
clockwise, the strap is tensioned. Do not turn off
the motor.
For adjustment of strap tension (by
pressure regulator on maintenance unit),
see chapter 5.1.
Sealing
– Seal the straps using sealer (see operating instruc-
tion STR 68/STR 69).
Cut off strap
– Swivel the tool STR 67 up and down until the
strap is cut off. Switch off the air motor by turning
the knurled wheel counterclockwise.
Strapex STR 67
13