Publicité
Les langues disponibles
Les langues disponibles
Note: The es200p built-in stand mounting adapter can be used with Yorkville
SW-Teletube accessory to support our E160 cabinets. The support tube can be adusted up to
it's full 5'4" extension safely as long as the es200p is not inclined more than 10° (10 degrees).
WARNING: Larger/heavier cabinets should not be used with the stand mount!
North American:
Power Amplifier Power (internal):
Frequency response:
Input Impedance:
Speaker components:
The sleeves of the input are not grounded except when the input ground switch is
set to GND. Grounding is done through a 10-ohm protection device in order to
Clipping, average voice coil current, thermal
Specifications
Power Requirements
117VAC 60 Hz
260 Watts Maximum
European:
230VAC 50 Hz
260 Watts Maximum
200 Watts
50 Hz to 110 Hz
80 kohms
10" 2-ohm, 200 Watts
Input Connections:
Tip:
Positive
Ring(Shaft):
Negative
Grounding:
prevent damage due to miswiring.
Limiting:
Maximum SPL:
125 dB (50 Hz to 110 Hz)
Weight:
54 lb. (24.5 kg)
Dimensions:
(WxDxH):
17.5 x 27 x 14 inches
XX...
44.5 x 68.6 x 35.6 cm
3
Publicité
