Publicité

Les langues disponibles
  • FR

Les langues disponibles

Liens rapides

PCUSB10 – USB 2.0 HUB (3 PORTS) + MULTICARD READER/WRITER, 21 CARD TYPES, HIGH SPEED
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the PCUSB10! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
The PCUSB10 contains: USB 2.0 Card Reader/Writer with 3-port HUB, USB connection cable (4 x 5 pins), CD driver,
this manual.
Its features are:
• 21-in-1 card reader/writer with built-in USB 2.0 HUB, 3 ports
• USB 2.0 transfer rate up to 480Mb/sec, backward USB 1.1 compatible (max. 12Mb/sec)
• USB powered or external mini 220VAC / 5VDC power adapter (not included)
• 5 LED indicators for power ON, card reader access, USB port 1, 2, 3 connected
• Data copying between cards without intermediate storage
• Compact & lightweight design
• Display for name or logo with EL backlight
• All-in-1 design, the 4 memory card slots support 21 digital memory card types (see below)
Slot 1: CF type I, CF type II, CF-Ultra II, Micro Drive
Slot 2: MS, MS (Magic Gate), MS-Pro (Magic Gate), HS-MS-Pro-Duo (Magic Gate)
**MS-Duo (Magic Gate), MS-Pro-Duo (Magic Gate), HS-MS-Pro-Duo (Magic Gate)
Slot 3: SD, SD-Ultra, SDC, MMC, HS-MMC, RS-MMC
**Mini SD, T-Flash
Slot 4: SM, X Card
(** indicates that a card adapter is required)
2. Specifications
• Supports Windows ME/2000/XP & Mac OS X without device driver
• Supports Windows 98SE with USB device driver (incl.)
• Power: USB bus powered or 5VDC power supply (not incl.)
• Dimensions: 85 x 70 x 15.5mm
• Weight: 74g
• Comes with connection cable (100cm) & driver (on CD)
1. USB port
2. Port 1, 2, 3
3. Card reader access LED
4. Power ON LED
PCUSB10
USB + LIGHT
5. Slot 1
6. Slot 2
7. Slot 3
8. Slot 4
9. USB upstream
10. DC jack
1
VELLEMAN

Publicité

Table des Matières
loading

Sommaire des Matières pour Velleman PCUSB10

  • Page 1 If in doubt, contact your local waste disposal authorities. Thank you for buying the PCUSB10! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it and contact your dealer.
  • Page 2: System Requirements

    Do not force the USB cable into the USB upstream port. Doing so will damage the port. Keep the PCUSB10 out of the sun and away from high current electronic devices. Do not disassemble or repair the PCUSB10. Contact your retailer if assistance is needed.
  • Page 3: Specificaties

    Gebruik geen kracht wanneer u de USB kabel met de USB poort aansluit om beschadigingen te vermijden. Houd de PCUSB10 uit direct zonlicht en uit de buurt van toestellen met een hoge stroomsterkte. Herstel of neem de PCUSB10 niet uit elkaar. Neem contact op met uw verdeler wanneer u hulp nodig heeft. PCUSB10 VELLEMAN...
  • Page 4: De Software Installeren

    Si l’appareil a été endommagé pendant le transport, ne l'installez pas et consultez votre revendeur. The PCUSB10 est livré avec: USB 2.0 Lecteur/Graveur de carte avec HUB 3 fentes, câble de connexion USB (4 x 5 broches), driver CD, cette notice.
  • Page 5: Spécifications

    Ne forcez pas la connexion du câble USB au port USB (débit montant). Tenez le PCUSB10 hors de la lumière du soleil et à l’écart des appareils à forte intensité de courant. Ne réparez ou ne démontez pas le PCUSB10. Prenez contact avec votre revendeur en cas de difficultés.
  • Page 6 Verifique si el aparato ha sufrido algún daño en el transporte antes de la puesta en marcha. Si es el caso, no conecte el aparato a la red y póngase en contacto con su distribuidor. El PCUSB10 incluye: Lector/Editor multitarjeta USB 2.0 con HUB 3 puertos, cable de conexión USB (4 x 5 polos), driver CD, este manual del usuario.
  • Page 7: Exigencias Del Sistema

    Utilice sólo el cable USB incluido. No fuerce la conexión del cable USB al puerto USB (upstream). Mantenga el PCUSB10 lejos del alcance de la luz solar y los aparatos con fuerte intensidad de corriente. No repare ni desmonte el PCUSB10. Contacte con su distribuidor en caso de dificultades.
  • Page 8: Systemanforderungen

    Benutzen Sie keine Kraft wenn Sie das USB-Kabel an den USB-Port anschließen, so vermeiden Sie Beschädigungen. Den PCUSB10 keinem direkten Sonnenlicht oder einer hohen Stromstärke aussetzen. Reparieren oder demontieren Sie den PCUSB10 nicht. Wenden Sie sich an Ihren Händler wenn Sie Hilfe brauchen. 4. Die Software installieren Diese Richtlinien helfen Ihnen bei der Installation der Software für Windows2000/ME/XP.
  • Page 9 2. Schließen Sie den USB B-Anschluss an den Kartenleser/-Schreiber an. 3. Verwenden Sie einen DC-Adapter (5V/2A) als zusätzliche Stromversorgung wenn Sie USB-Gerät mit einem hohen Stromverbrauch verwenden. 1. AC Adapter (220VCA / 5VCC) 2. DC 5V/2A Alle Änderungen vorbehalten. PCUSB10 VELLEMAN...

Table des Matières