Technical Description; Control Elements; Mounting The Mains Rectifier - Dometic COOLPOWER MPS 35 Instructions De Montage Et De Service

Technical description

5 Technical description
The mains rectifier can operate all coolers and refrigerators with BD35F compressors
at 110 – 240 Vw.
With a 110 – 240 Vw mains connection, the rectifier automatically switches from bat-
tery to mains operation.
When disconnected from the 110 – 240 Vw mains supply, the rectifier automatically
switches back to battery operation. Mains operation via the rectifier always takes pri-
ority over battery operation.
5.1

Control elements

Item
in fig. 1, page 3
1
2
3
4
6

Mounting the mains rectifier

If you wish to mount the mains rectifier in a fixed position, please observe the follow-
ing mounting instructions:
A
NOTICE!
Fix the mains rectifier in upright position only. In case you have to install
the rectifier in a different position put the rectifier in a fire resistant hous-
ing to prevent any fire being roused to other objects by hot plastic trip-
ping through the air slots.
• Do not mount the device
– In wet or damp environments
– In the vicinity of combustible materials
– In areas where there is a danger of explosions
• Make sure the socket is near the device and is easily accessible.
8
Explanation
Mains cable
Battery input terminals
Compressor output terminals
Fastening holes
MPS35
EN