Installing And Connecting - Airfree Lotus Manuel D'instruction

Plug power cord into the nearest outlet.
Make sure the surface is dry (never place Airfree
Place Airfree ® on a flat surface not under furniture, shelves, or behind curtains, as it will
reduce airflow and Airfree
Place each Airfree ® Lotus in rooms up to 60 m². For larger rooms use proportionally additional
Airfree ® units. The use of just one Airfree
Airfree ® efficiency.
Airfree ® must be continuously on in the same room, 24 hours a day.
Airfree ® can only be used in rooms with minimum air volume of 10 m
Airfree ® can be installed in rooms equipped with air conditioning and heating systems.
However it is recommended not to place Airfree
in Airfree ® air flow.
Airfree ® can be placed in corridors but its air sterilisation effects will not affect adjacent rooms
Airfree ® shall not be placed near doors or under windows to avoid sterilised air to exit the
room.
To change globe light colours press the sensor on the back of Airfree
to the next colour. For the random mode please switch to pink and let it be. Maintaining finger
pressed on the sensor will increase or diminish brighteness.
To open Airfree ® Lotus' petals, press the top lid centre.
To close the petals, move them simultaneously towards the centre.

Installing and Connecting

® efficiency in reducing microorganisms.
® in rooms larger than recommended will reduce
10
® on wet floor or immerge in water).
3
® nearby them to avoid potential interference
® . Each touch will switch
, free of obstacles.