Regulatory Compliance Statements - ASCOM 914T Guide Rapide

Battery
The power source is one single cell. The single cell may be
alkaline (AAA) or rechargeable NiMH. Use any LR3-sized battery
or the rechargeable Inductive Battery Pack IBP1B.
While the receiver is not in use, place it in the T967 Storage/
Charging Rack, to save battery.
If you are using a rechargeable battery, make sure to regularly
place the receiver in a charging rack, for example every night.
Charging Battery
The rechargeable Inductive Battery Pack IBP1B can only be
charged in the T967 Storage/Charging Rack. Standard secondary
cells and primary cells cannot be recharged inside the eqipment.
We recommend that the receiver must be charged in a dry
environment with a temperature range of 0 to +40°C.

Regulatory compliance statements

EU/EFTA only
This equipment is intended to be used in the whole EU & EFTA.
This equipment is in compliance with the essential requirements
and other relevant provisions of R&TTE Directive 1999/51/EC.
The Declaration of Conformity may be consulted at:
https://www.ascom-ws.com/doc/
This equipment uses frequencies referring to different rules in the
various EU&EFTA countries.
A radio communication licence is in most cases neccessary for
the use of the equipment.
The frequencies required for operation of the radio equipment
must be notified and assigned prior to usage of the equipment.
6